Search
Close this search box.

14″ Anchor Spike

PAA-SC-4B

14″ anchor spike is used to install wheel stops, parking blocks, and ramps on gravel or asphalt.

Add to Quote

14″ ANCHOR SPIKE

PAA-SC-4B

Use this 14″ anchor spike to fasten wheel stops and ramps to the ground to keep them securely in place. Use these 14″ steel rebar spikes for installation of our parking curbs, stops, blocks, cable ramps, speed bumps, and more into asphalt surfaces or gravel. Spikes are made from steel. The size of the spike head is 1 1/8″ diameter and the spike is 1/2″ diameter. To install the product, lay out the item and mark the pre-set holes on the ground surface, drill a hole into the asphalt and hammer the anchor spike through the parking stop until it is snug against the surface. If the asphalt is older, it may help to coat the spikes with epoxy during install to prevent the asphalt from cracking. Note:  These spikes are not for use with concrete surfaces.